Get an easier and fast tool to make an exact measurement of your carpentry!
Ideal for a variety of uses, including flooring, tile layout, paneling, wallpapering, stenciling, wainscoting, finish carpentry, outlet and switch layout, wall stud layout and partition installation.
Laser Level Square is an easy to use leveling tool. If you like to make an accurate measurement and a perfect angle.
This tool is your best buddy!
Size A: Ellipse
There are 2 laser lines (the horizontal and vertical lines), an ON/OFF switch, lever vials, a fastening pin, a suspension device, a magnet, a battery compartment and a 5/8″screw.
- Material of the Laser Level: ABS plastic
- Color: as shown in the picture
- Product Specification: 118 * 70 MM /4.64 * 2.76in
- Laser radiation, please avoid direct eye exposure.
- It is not a toy, please keep it away from the children.
- If the laser device is going to be laid idle for three months, please remove the batteries to avoid the damage caused by the battery leakage.
Package List:1 x laser level (2pcs AAA batteries are not included)
Size B : Triangle
- Generate 2 lines at the right angle (90 degrees)
- Ideal for floors, tiles, paneling, wall fixtures, wallpapering, stenciling, wainscoting, finish carpentry and etc..
- With the simple one – button operation method, it powers two perpendicular laser lines (90 degrees) on and off.
- The laser level square is a layout tool which is easy to use.
- It projects horizontal and vertical laser chalk lines on surfaces.
- Dual diodes for making 90 – degree laser beam on any surfaces.
- There are two bubble vials.
- Two suction cups allow the laser level square to be mounted onto the surfaces with alignment guide for 90-degree layout calculation and turning angles in 5-degree increment layout and partition installation.
- Dimensions: (L x W x H):150 x 73 x 50mm / 5.91* 2.87 * 1.97in
- Wavelength: 630-670nm
- Power output: <5mw
- Available distance: 16m/ 52.49ft
- Type of the battery: 3pcs AAA 1.5V batteries (Not included)
Package List:1 X Square laser level